| -: All Maxview Aerials:- |
|
[ 1 ]
[ 2 ]
[ 3 ]
|
 |
Maxview 10â?? Straight Mast Aerials
A 3000 x 38mm (10ft. x 1.5in.) straight mast. Manufactured in tubular aluminium.
|
|
|
Maxview 13dB Gain UHF Masthead Amplifier Aerials
Designed to improve signal performance in weak UHF TV signal areas. This amp features low noise figures and excellent UHF input and output signal handling characteristics for a large dynamic range. Provides excellent performance in domestic and all MATV systems. Specifications: Inputs 1 x UHF Bandwidth (MHz) 470-860 Gain 13dB Noise Figure 2.5dB Input RLR (75ohm) 12dB Output RLR (75ohm) 8dB No of Outputs 1 12V Requirements 25mA Line Powering No RF
|
|
|
Maxview 14-Element TV Aerial Aerials
This high quality 14 element aerial is suitable for normal UHF TV signal areas. It is manufactured from high quality corrosion-resistant aluminium and comes complete with a quality folded tubular dipole, aerial clamp and reflector. It also features an integral balun that optimises signal match to ensure the maximum power transfer Specifications: Receives all available analogue and digital UHF TV signals Specifications: Group: W Channel no: 21-68 No of elements: 14 Forward gai
|
|
|
Maxview 152mm (6â??) Chimney Bracket Kit Aerials
Chimney bracket designed for mounting on the chimney corner. Complete with single lashing kit to give 152mm (6) stand-off for 25mm (1) and 32mm (1<+>1/<->4) masts. Kit includes: 1 x 152mm (6") chimney bracket 1 x 5m (16ft) lashing wire 2 x 44mm (1¾ ") V bolts & nuts 2 x 114mm (4½ ") x 35mm (1 3/8") J bolts & nuts 3 x corner plates 2 x eyes
|
|
|
Maxview 18-Element Wideband TV Aerial Aerials
The Maxview high quality 75 ohm 18 element wideband UHF TV aerial is suitable for weak UHF TV signal areas. It is manufactured from high quality corrosion-resistant aluminium and comes complete with a good quality folded tubular dipole, aerial clamp, reflector and centre mount for extra support. Suitable for Analogue and Digital transmissions Specifications: Group: Wideband Channel no: 21-68 No. of elements: 18 Foward gain (dB): 8.6 Front/back ratio (dB): 18 Acceptance a
|
|
|
Maxview 23dB Gain UHF Masthead Amplifier Aerials
The Maxview 23dB Gain UHF Masthead Amplifier features a very low noise figure and is designed to boost UHF TV signals in very weak signal areas for improved signal performance. It is designed for indoor or outdoor use and for mounting close to the aerial, requiring +12Vdc line powering from BV71N Masthead Power Supply Unit. The high gain MHA23U/S caters for extremely weak signals and/or long cable run installations and is available with a cascade line powering option. The MHA23U/S is fully scree
|
|
|
Maxview 254mm (10â??) T & K Wall Bracket Aerials
T&K wall bracket designed for mounting on gable ends to give 254mm(10) stand off for 38mm (1½ ) to 51mm (2) masts. Kit includes: 2 brackets, 2 V bolts and 4 nuts.
|
|
|
Maxview 3â?? Cranked Mast Aerials
A 915 x 25mm (3ft. x 1in.) cranked mast giving a 229mm (9in.) stand-off. Manufactured in tubular aluminium, wall thickness 1.2mm.
|
|
|
Maxview 4.5â?? Stand-Off Wall Bracket Aerials
designed for mounting on walls or gable ends to give 114mm (4½ ) stand off for 25mm (1) masts. Kit includes: 1 bracket, 2U bolts and 4 nuts. Stand-off wall bracket
|
|
|
Maxview 406mm (16â??) T & K Wall Bracket Aerials
T & K wall bracket designed for mounting on gable ends to give 406mm (16) stand-off for 38mm (1<+>1/<->2) and 51mm (2) masts. Kit includes: 1 x 406mm (16in) T & K wall bracket 2 x 63mm (2.5in) V bolts 4 x nuts
|
|
|
Maxview 48-Element High Gain TV Aerial Aerials
This 48 element high gain TV aerial gives improved signal reception in weak signal areas. An ingenious design allows the permanently attached elements to â??lockâ?? into place in seconds - no screwing required. The product comes with fully illustrated, easy to follow instructions. This wideband aerial is suitable for all TV channels. Suitable for analogue and digital transmissions Suitable for poor reception areas Specifications: Group: Wideband Channel number: 21 - 68 Elements:
|
|
|
Maxview 5â?? Cranked Mast Aerials
A 1800 x 25mm (5ft. x 1in.) cranked mast giving a stand off of 600mm (2ft). Manufactured in tubular aluminium.
|
|
|
Maxview 6-Element VHF FM Directional Aerial Aerials
The Maxview 6 element directional FM Aerial is a high performance beam aerial aimed at the enthusiast or keen DIY person. Ideal for use in weak signal areas or larger VHF/FM signal distribution systems. The high gain multi element model comes complete with a good quality folded tubular dipole for the driven element and an aerial clamp. The aerial has been performance measured and tested in accordance with BS5640 Part1:1984. Specifications: Bandwidth (MHz): 88-108 Number of elements: 6
|
|
|
Maxview 6â?? Straight Mast Aerials
A 1829 x 25mm (6ft. x 1in.) straight mast. Manufactured in tubular aluminium, wall thickness 1.2mm.
|
|
|
Maxview 7.5â?? Stand-off Bracket Aerials
Stand-off wall bracket designed for mounting on walls or gable ends to give 190mm (7<+>1/<->2) stand off for 35mm - 40mm (1<+>1/<->4 - 1<+>1/<->2) masts. Kit includes: 1 bracket, 2 U bolts and 4 nuts.
|
|
|
[ 1 ]
[ 2 ]
[ 3 ]
|
| -: Maxview Indoor FM Aerials Aerials Links :- |
|
|
Thanks for visiting Maxview Indoor FM Aerials Aerials on Priceshop.
We hope you have found our site useful and informative.
Priceshop is here to provide you with prices and technical specifications on Maxview Indoor FM Aerials Aerials and many other Maxview Aerials .
If you have any queries on Maxview Indoor FM Aerials Aerials or have any information on Maxview Indoor FM Aerials Aerials that other users would find helpful then please do not hesitate to contact us and let us know.
Thanks again and we wish you the best of luck with you search for Maxview Indoor FM Aerials Aerials
Priceshop.co.uk
|
| -: Washing Machines Links :- |
| |
